Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
(Optional) For EAP messages other than Identity Requests or EAPOL (WPA)
key messages, specifies the maximum number of times (0 to 20 retries) that
the controller retransmits the message to a wireless client.
key messages, specifies the maximum number of times (0 to 20 retries) that
the controller retransmits the message to a wireless client.
The default value is 2.
retries retries
(Optional) For EAP messages other than Identity Requests or EAPOL (WPA)
key messages, specifies the amount of time (1 to 120 seconds) that the
controller waits before retransmitting the message to a wireless client.
key messages, specifies the amount of time (1 to 120 seconds) that the
controller waits before retransmitting the message to a wireless client.
The default value is 30 seconds.
timeout seconds
Configures 802.1x WEP related paramters.
wep key
Specifies the WEP key index value as 0
index 0
Specifies the WEP key index value as 3
index 3
Command Default
Default for eapol-key-timeout: 1 second.
Default for eapol-key-retries: 2 retries.
Command Modes
config
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example lists all the commands under wireless security dot1x .
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wireless security dot1x ?
eapol-key
Configure eapol-key related parameters
group-key
Configures EAP-broadcast key renew interval time in seconds
identity-request
Configure EAP ID request related parameters
radius
Configure radius messages
request
Configure EAP request related parameters
wep
Configure 802.1x WEP related paramters
<cr>
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
444
OL-29471-01
wireless security dot1x