Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
debug platform udld
To enable debugging of the platform-dependent UniDirectional Link Detection (UDLD) software, use the
debug platform udld command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug platform udld command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug platform udld [error| event] [switch switch-number]
no debug platform udld [error| event] [switch switch-number]
Syntax Description
(Optional) Displays error condition debug messages.
error
(Optional) Displays UDLD related platform event debug messages.
event
(Optional) Displays UDLD debug messages for the specified stack member.
switch switch-number
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
The undebug platform udld command is the same as the no debug platform udld command.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
474
OL-29471-01
debug platform udld