Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
client vlan
To configure a WLAN interface or an interface group, use the client vlan command. To disable the WLAN
interface, use the no form of this command.
interface, use the no form of this command.
client vlan interface-id-name-or-group-name
no client vlan
Syntax Description
Interface ID, name, or VLAN group name.
interface--id-name-or-group-name
Command Default
The default interface is configured.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable a client VLAN on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
client vlan client-vlan1
Controller(config-wlan)#
end
This example shows how to disable a client association limit on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no client vlan
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
532
OL-29471-01
client vlan