Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
dtim dot11
To configure the Delivery Traffic Indicator Message (DTIM) period for a WLAN, use the dtim dot11
command. To disable DTIM, use the no form of this command.
command. To disable DTIM, use the no form of this command.
dtim dot11 {5ghz| 24ghz} dtim-period
no dtim dot11 {5ghz| 24ghz} dtim-period
Syntax Description
Configures the DTIM period on the 5-GHz band.
5ghz
Configures the DTIM period on the 2.4-GHz band.
24ghz
Value for the DTIM period. The range is from 1 to 255.
dtim-period
Command Default
The DTIM period is set to 1.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable the DTIM period on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
dtim dot11 24ghz 3
This example shows how to disable the DTIM period on a WLAN on the 2.4-GHz band:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no dtim dot11 24ghz 3
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
538
OL-29471-01
dtim dot11