Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
static-ip tunneling
To enable static IP tunneling on a WLAN, use the static-ip tunneling command. To disable the static IP
tunneling feature, use the no form of this command.
tunneling feature, use the no form of this command.
static-ip tunneling
no static-ip tunneling
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to enable static-IP tunneling:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
static-ip tunneling
This example shows how to disable static-IP tunneling:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no static-ip tunneling
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
559
static-ip tunneling