Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap dot11 rrm group-member
To configure members in 802.11 static RF group, use the ap dot11 rrm group-member command. To
remove the member, use the no form of the command.
remove the member, use the no form of the command.
ap dot11 {24ghz| 5ghz} rrm group-member controller-name controller-ip
no ap dot11 {24ghz| 5ghz} rrm group-member controller-name controller-ip
Syntax Description
Specifies the name of the controller to be added.
controller-name
Specifies the IP address of the controller to be added.
controller-ip
Command Default
None.
Command Modes
Interface configuration.
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example shows how to add a controller in the 5-GHz automatic-RF group
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap dot11 5ghz rrm group-member ABC 10.1.1.1
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
578
OL-29471-01
ap dot11 rrm group-member