Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap dot11 rrm monitor
To Configure monitor settings on the 802.11 networks, use the ap dot11 rrm monitor command.
ap dot11 {24ghz| 5ghz} rrm monitor{channel-list| {all| country| dca}| coverage| load| noise| signal}
seconds
seconds
Syntax Description
Specifies the 802.11b parameters.
24ghz
Specifies the 802.11a parameters.
5ghz
Monitors the noise, interference, and rogue monitoring channel list for all
channels.
channels.
channel-list all
Monitors the noise, interference, and rogue monitoring channel list for the
channels used in the configured country code.
channels used in the configured country code.
channel-list country
Monitors the noise, interference, and rogue monitoring channel list for the
channels used by automatic channel assignment.
channels used by automatic channel assignment.
channel-list dca
Specifies the coverage measurement interval.
coverage
Specifies the load measurement interval.
load
Specifies the noise measurement interval.
noise
Specifies the signal measurement interval.
signal
Measurement interval time from 60 to 3600 seconds.
seconds
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to monitor the channels used in the configured country:
Controller(config)#
ap dot11 24ghz rrm monitor channel-list country
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
651
ap dot11 rrm monitor