Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
location
To configure location information for an endpoint, use the location command in global configuration mode.
To remove the location information, use the no form of this command.
To remove the location information, use the no form of this command.
location {admin-tag string| algorithm| civic-location identifier {host| id}| civic-location identifier {host|
id}| elin-location {string |identifier id}|
expiry{calibrating-clienttimeout-value|clienttimeout-value|rouge-apstimeout-value|tagstimeout-value}|
geo-location identifier {host| id}| notify-threshold{clientdb|rouge-apsdb|tagsdb| plm{calibrating|
{multiband | uniband}| clientburst-interval}| prefer{cdp weightpriority-value|lldp-med
weightpriority-value|static config weightpriority-value}|rfid{status
|timeoutrfid-timeout-value|vendor-namename}|rssi-half-life {
calibrating-clientseconds|clientseconds|rogue-apsseconds|tagsseconds}
id}| elin-location {string |identifier id}|
expiry{calibrating-clienttimeout-value|clienttimeout-value|rouge-apstimeout-value|tagstimeout-value}|
geo-location identifier {host| id}| notify-threshold{clientdb|rouge-apsdb|tagsdb| plm{calibrating|
{multiband | uniband}| clientburst-interval}| prefer{cdp weightpriority-value|lldp-med
weightpriority-value|static config weightpriority-value}|rfid{status
|timeoutrfid-timeout-value|vendor-namename}|rssi-half-life {
calibrating-clientseconds|clientseconds|rogue-apsseconds|tagsseconds}
no location {admin-tag string| algorithm| civic-location identifier {host| id}| civic-location identifier
{host| id}| elin-location {string |identifier id}|
expiry{calibrating-clienttimeout-value|clienttimeout-value|rouge-apstimeout-value|tagstimeout-value}|
geo-location identifier {host| id}| notify-threshold{clientdb|rouge-apsdb|tagsdb| plm{calibrating|
{multiband | uniband}| clientburst-interval}| prefer{cdp weightpriority-value|lldp-med
weightpriority-value|static config weightpriority-value}|rfid{status
|timeoutrfid-timeout-value|vendor-namename}|rssi-half-life {
calibrating-clientseconds|clientseconds|rogue-apsseconds|tagsseconds}
{host| id}| elin-location {string |identifier id}|
expiry{calibrating-clienttimeout-value|clienttimeout-value|rouge-apstimeout-value|tagstimeout-value}|
geo-location identifier {host| id}| notify-threshold{clientdb|rouge-apsdb|tagsdb| plm{calibrating|
{multiband | uniband}| clientburst-interval}| prefer{cdp weightpriority-value|lldp-med
weightpriority-value|static config weightpriority-value}|rfid{status
|timeoutrfid-timeout-value|vendor-namename}|rssi-half-life {
calibrating-clientseconds|clientseconds|rogue-apsseconds|tagsseconds}
Syntax Description
Configures administrative tag or site information. Site or location
information in alphanumeric format.
information in alphanumeric format.
admin-tagstring
Configures the algorithm used to average RSSI and SNR values.
algorithm
Configures civic location information.
civic-location
Specifies the name of the civic location, emergency, or geographical
location.
location.
identifier
Defines the host civic or geo-spatial location.
host
Name of the civic, emergency, or geographical location.
The identifier for the civic location in the LLDP-MED
controller TLV is limited to 250 bytes or less. To avoid
error messages about available buffer space during
controller configuration, be sure that the total length of all
civic-location information specified for each civic-location
identifier does not exceed 250 bytes.
controller TLV is limited to 250 bytes or less. To avoid
error messages about available buffer space during
controller configuration, be sure that the total length of all
civic-location information specified for each civic-location
identifier does not exceed 250 bytes.
Note
id
Configures emergency location information (ELIN).
elin-location
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
45
location