Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap name telnet
To enable Telnet connectivity on an access point, use the ap name telnet command. To disable Telnet
connectivity on an access point, use the no form of this command.
connectivity on an access point, use the no form of this command.
ap name ap-name telnet
ap name ap-name no telnet
Syntax Description
Name of the Cisco lightweight access point.
ap-name
Command Default
None
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to disable Telnet connectivity on access point cisco_ap1:
Controller#
ap name cisco_ap1 no telnet
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
712
OL-29471-01
ap name telnet