Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap name syslog host
To configure a syslog server for a specific Cisco lightweight access point, use the ap name syslog host
command.
command.
ap name ap-name syslog host syslog-host-ip-address
Syntax Description
Name of the Cisco lightweight access point.
ap-name
IP address of the syslog server.
syslog-host-ip-address
Command Default
255.255.255.255
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
By default, the syslog server IP address for each access point is 255.255.255.255, which indicates that it is
not yet set. When the default value is used, the global access point syslog server IP address is pushed to the
access point.
not yet set. When the default value is used, the global access point syslog server IP address is pushed to the
access point.
Examples
This example shows how to configure a syslog server:
Controller#
ap name AP2 syslog host 192.0.2.54
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
722
OL-29471-01
ap name syslog host