Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap static-ip
To configure Cisco lightweight access point static IP address settings, use the ap static-ip command. To
disable access point static IP settings, use the no form of this command.
disable access point static IP settings, use the no form of this command.
ap static-ip {domain domain-name| name-server ip-address}
no ap static-ip {domain| name-server}
Syntax Description
Specifies the domain to which a specific access point or all access points
belong.
belong.
domain
Domain name.
domain-name
Specifies a DNS server so that a specific access point or all access points
can discover the controller using DNS resolution.
can discover the controller using DNS resolution.
name-server
DNS server IP address.
ip-address
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
An access point cannot discover the controller using Domain Name System (DNS) resolution if a static IP
address is configured for the access point, unless you specify a DNS server and the domain to which the access
point belongs.
address is configured for the access point, unless you specify a DNS server and the domain to which the access
point belongs.
Examples
This example shows how to configure a static IP address for all access points:
Controller(config)#
ap static-ip domain cisco.com
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
730
OL-29471-01
ap static-ip