Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
ap dot11 24ghz rrm channel cleanair-event
To enable EDRRM for 2.4 GHz devices, use the ap dot11 24ghz rrm channel cleanair-event command.
To disable EDRRM, use the no form of the command.
To disable EDRRM, use the no form of the command.
ap dot11 24ghz rrm channel cleanair-event sensitivity {high| low| medium}
no ap dot11 24ghz rrm channel cleanair-event sensitivity {high| low| medium}
Syntax Description
Enables EDRRM cleanair event-driven RRM parameters
cleanair-event
Command Default
None.
Command Modes
Interface configuration.
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example shows how to set EDRRM sensitivity to low.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap dot11 24ghz rrm channel cleanair-event sensitivity low
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
820
OL-29471-01
ap dot11 24ghz rrm channel cleanair-event