Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
dscp
To configure a differentiated services code point (DSCP) value for flow exporter datagrams, use the dscp
command in flow exporter configuration mode. To remove a DSCP value for flow exporter datagrams, use
the no form of this command.
command in flow exporter configuration mode. To remove a DSCP value for flow exporter datagrams, use
the no form of this command.
dscp dscp
no dscp dscp
Syntax Description
DSCP to be used in the DSCP field in exported datagrams. The range is 0 to 63. The
default is 0.
default is 0.
dscp
Command Default
The differentiated services code point (DSCP) value is 0.
Command Modes
Flow exporter configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None
Examples
The following example sets 22 as the value of the DSCP field in exported datagrams:
Controller(config)#
flow exporter FLOW-EXPORTER-1
Controller(config-flow-exporter)#
dscp 22
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
874
OL-29471-01
dscp