Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
match datalink ethertype
To configure the Ethertype of the packet as a key field for a flow record, use the match datalink ethertype
command in flow record configuration mode. To disable the Ethertype of the packet as a key field for a flow
record, use the no form of this command.
command in flow record configuration mode. To disable the Ethertype of the packet as a key field for a flow
record, use the no form of this command.
match datalink ethertype
no match datalink ethertype
Syntax Description
This command has no keywords or arguments.
Command Default
The Ethertype of the packet is not configured as a key field.
Command Modes
Flow record configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
The observation point of the match datalink ethertype command is the interface to which the flow monitor
that contains the flow record with the command is applied.
that contains the flow record with the command is applied.
Examples
The following example configures the Ethertype of the packet as a key field for a Flexible NetFlow flow
record:
record:
Controller(config)#
flow record FLOW-RECORD-1
Controller(config-flow-record)#
match datalink ethertype
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
878
OL-29471-01
match datalink ethertype