Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
match ipv6 source address
To configure the IPv6 source address as a key field for a flow record, use the match ipv6 source address
command in flow record configuration mode. To disable the use of the IPv6 source address as a key field for
a flow record, use the no form of this command.
command in flow record configuration mode. To disable the use of the IPv6 source address as a key field for
a flow record, use the no form of this command.
match ipv6 source address
no match ipv6 source address
Command Default
The IPv6 source address is not configured as a key field.
Command Modes
Flow record configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
A flow record requires at least one key field before it can be used in a flow monitor. The key fields differentiate
flows, with each flow having a unique set of values for the key fields. The key fields are defined using the
match command.
flows, with each flow having a unique set of values for the key fields. The key fields are defined using the
match command.
Examples
The following example configures a IPv6 source address as a key field:
Controller(config)#
flow record FLOW-RECORD-1
Controller(config-flow-record)#
match ipv6 source address
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
890
OL-29471-01
match ipv6 source address