Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
show platform ip wccp
To display platform-dependent Web Cache Communication Protocol (WCCP) information, use the show
platform ip wccp privileged EXEC command.
platform ip wccp privileged EXEC command.
show platform ip wccp {cache-engines | interfaces | service-groups} [switch switch-number]
Syntax Description
Displays WCCP cache engines.
cache-engines
Displays WCCP interfaces.
interfaces
Displays WCCP service groups.
service-groups
(Optional) Displays WCCP information only for specified
switch-number.
switch-number.
switch switch-number
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
This command is available only if your controller is running the IP Services feature set.
Examples
The following example displays WCCP interfaces:
Controller#
show platform ip wccp interfaces
WCCP Interfaces
**** WCCP Interface Gi1/0/3 iif_id:0x104a60000000087 (#SG:1), vrf:0 Ingress
le_handle:0x565dd208 IPv4 Sw-Label:3, Asic-Label:3
le_handle:0x565dd208 IPv4 Sw-Label:3, Asic-Label:3
* Service group id:0 type: Well-known
token:126 vrf:0 (ref count:1)
Open service
prot: PROT_TCP
l4_type: Dest ports
priority: 240
port[0]: 80
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
949
show platform ip wccp