Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
• The software implements the VLAN Query Protocol (VQP) client, which can query a VMPS, such as
a Catalyst 6500 series switch. The switch cannot be a VMPS. You must configure the server before
configuring a port configured as dynamic.
configuring a port configured as dynamic.
• Use dynamic-access ports only to connect end stations. Connecting them to switches or routers (that use
bridging protocols) can cause a loss of connectivity.
• Configure the network so that STP does not put the dynamic-access port into an STP blocking state.
The Port Fast feature is automatically enabled on dynamic-access ports.
• Dynamic-access ports can only be in one VLAN and do not use VLAN tagging.
• Dynamic-access ports cannot be configured as
◦Members of an EtherChannel port group (dynamic-access ports cannot be grouped with any other
port, including other dynamic ports).
◦Source or destination ports in a static address entry.
◦Monitor ports.
You can verify your setting by entering the show interfaces vlan-id switchport privileged EXEC
command and examining information in the Administrative Mode and Operational Mode rows.
command and examining information in the Administrative Mode and Operational Mode rows.
Examples
This example shows how to change a switched port interface that is operating in access mode to operate in
VLAN 2 instead of the default VLAN:
VLAN 2 instead of the default VLAN:
Controller(config-if)#
switchport access vlan 2
Related Commands
Description
Command
Configures the VLAN membership mode of a port.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
507
switchport access vlan