Примечания к выпуску для Cisco Cisco 5760 Wireless LAN Controller
30
Release Notes for Cisco 5760 Controller, Cisco IOS XE Release 3.2.xSE
OL-28114-04
Caveats
•
CSCug90789
When the internal process takes more than 3 seconds to process the mobility state change request,
the client can be stuck in local state on the foreign switch. As a result, traffic is not forwarded
through the anchor; instead, traffic is forwarded through the foreign switch.
the client can be stuck in local state on the foreign switch. As a result, traffic is not forwarded
through the anchor; instead, traffic is forwarded through the foreign switch.
There is no workaround.
•
CSCuh09405
When multiple activities such as the following are running in parallel, the controller may
unexpectedly reboot.
unexpectedly reboot.
–
multiple SSH sessions
–
multiple Telnet sessions
–
several invalid logins
–
multiple show-tech CLI commands executed
There is no workaround.
•
CSCuh09941
There is an QoS ACL matching issue when multiple classes match in the ACL range.
The workaround is to remove auto qos voip cisco-softphone from all attaching interfaces and then
reattach the policy.
reattach the policy.
•
CSCuh68137
Katana-3.11.22-3500TSIM Clients for WLAN in client excluded state when with ACL.
Workaround: Do not use an ACL.
•
CSCuh90283
Access Points cannot register to the 5760 controller when the wireless management VLAN is 1 and
the SVI IP address is 172.16.140.230/231.
the SVI IP address is 172.16.140.230/231.
The workaround is to use a different IP address in this subnet.
•
CSCuh93075
BW of the show interfaces port-channel privileged EXEC command does not display correctly.
There is no workaround.
•
CSCui23050
The external webauth page redirect stops working after some time.
The workaround is to reboot the system.
•
CSCui40588
After a TACACS authentication, the wireless GUI is not available on the switch.
The workaround is to use CLI interface (Telnet, Console, SSH) and configure the device.
•
CSCui43534
The WLC5760 controller crashes during CWA client association when ISE is unreachable.
Workaround:
1.
Configure backup radius.
2.
Remove mac filter.