Техническая Инструкция для Cisco Cisco 4404 Wireless LAN Controller
802.3af-compliant Power over Ethernet interface to connect IP devices
NEMA 4X certified enclosure
LED status indicators
Mesh Architecture and Video Deployment Guidelines
Configuration and Deployment Guide
This document describes how to configure Mesh access points in an Outdoor environment to support
Video Surveillance applications. This document builds on concepts introduced in the 1520 series
deployment guide and provides deployment and configuration considerations for Video Surveillance.
Video Surveillance applications. This document builds on concepts introduced in the 1520 series
deployment guide and provides deployment and configuration considerations for Video Surveillance.
Pre-requisites
Ensure that the following requirements are met before you attempt to configure.
Familiarity with basic wireless mesh technology
Working mesh network
Basic understanding of how Cameras work. The cameras can be Analog cameras using encoders
& decoders, wired & Wireless IP cameras
& decoders, wired & Wireless IP cameras
Please refer to the
Cisco Mesh AP 1520 series deployment guide
for a more fundamental good
understanding of Cisco Mesh access point installation considerations.
This document provides design and deployment guidelines for the deployment of secure enterprise,
campus and metropolitan Wi-Fi network within the Cisco mesh networking solution.
campus and metropolitan Wi-Fi network within the Cisco mesh networking solution.
Solution Components
The information in this document is based on these software and hardware versions:
Cisco WLC5500/4400 that runs firmware 6.0.182.0
Cisco 152x Series Lightweight Mesh Access points with Omni directional antennas.
Analog Cameras, IP wired Cameras, Wireless IP cameras.
Encoders/decoders or Transmitter/Recorder.
Video monitoring software/server
Coax Cables /breakout boxes, accessories for Cameras.
Cisco 4400 Series Wireless LAN Controller