Руководство По Устранению Ошибки для Cisco Cisco Flex 7510 Wireless Controller
The MAC address is pre−populated in the Device Registration guest page for the DeviceID. The user
enters a description and accepts the Acceptable Use Policy (AUP) if required.
enters a description and accepts the Acceptable Use Policy (AUP) if required.
5.
The user selects Accept and begins to download and install the SPW.
6.
The supplicant for that user's device is provisioned along with any certificates.
7.
CoA occurs, and the device reassociates to the corporate SSID (CORP) and authenticates with
EAP−TLS (or other authorization method in use for that supplicant).
EAP−TLS (or other authorization method in use for that supplicant).
8.
Single SSID Wireless BYOD Self−Registration
In this scenario, there is a single SSID for corporate access (CORP) that supports both Protected Extensible
Authentication Protocol (PEAP) and EAP−TLS. There is no Guest SSID.
Authentication Protocol (PEAP) and EAP−TLS. There is no Guest SSID.
This is the process for single SSID wireless BYOD self−registration:
The user associates to CORP.
1.
The user enters an employee username and password into the supplicant for the PEAP authentication.
2.
The ISE authenticates the user, and, based on the PEAP method, provides an authorization policy of
accept with redirect to the Employee Device Registration guest page.
accept with redirect to the Employee Device Registration guest page.
3.
The user opens a browser and is redirected to the Employee Device Registration guest page.
4.
The MAC address is pre−populated in the Device Registration guest page for the DeviceID. The user
enters a description and accepts the AUP.
enters a description and accepts the AUP.
5.
The user selects Accept and begins to download and install the SPW.
6.
The supplicant for that user's device is provisioned along with any certificates.
7.
CoA occurs, and the device reassociates to the CORP SSID and authenticates with EAP−TLS.
8.
Feature Configuration
Complete these steps in order to begin configuration:
For this guide, ensure that the WLC version is 7.2.110.0 or later.
1.
Navigate to Security > RADIUS > Authentication, and add the RADIUS server to the WLC.
2.