Примечания к выпуску для Cisco Cisco 4404 Wireless LAN Controller

The AP1520 supports four Ethernet interfaces: g0–PoE in, g1–PoE out, g2–Cable and g3–Fiber. Both 
the controller CLI and GUI show the state for each of the four Gigabit Ethernet ports as noted below.

The show mesh environment summary command displays the Up or Down status for four Ethernet 
interfaces for the AP1520. 

For the four AP 1520 Ethernet ports, the Down state is noted as Dn.

The Up or Down (Dn) status of the four Ethernet ports is reported in the following format: 
port0:port1:port2:port3. For example, UpDnDnDn indicates that port0 is Up and ports 1, 2, and 3 
are Down (Dn).

The AP1510 only reports for one Ethernet port and the Down state is reported as Down.

(controller)>show mesh env summary 

AP Name 

Temperature(C/F) Heater Ethernet Battery 

-------- 

--------------- -------- ------- -------

rap1242.c9ef N/A 

N/A UP 

N/A 

rap1522.a380 29/84 

OFF UpDnDnDn 

N/A 

rap1522.4da8 31/87 

OFF UpDnDnDn 

N/A 

map1522.4dcc 28/82 

OFF DnDnDnDn 

N/A 

lap1510.2320 33/91 

OFF DOWN  N/A

map1522.d4af 29/84 

OFF DnDnDnDn 

N/A 

The Wireless > AP Name > Details window displays the state of the four Gigabit Ethernet ports in 
the Mesh Information section.