Примечания к выпуску для Cisco Cisco 4404 Wireless LAN Controller
15
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 4.0.179.8
OL-11101-01
Important Notes
Pinging from a Network Device to a Controller Dynamic Interface
Pinging from a network device to a controller dynamic interface may not work in some configurations.
When pinging does operate successfully, the controller places Internet Control Message Protocol
(ICMP) traffic in a low-priority queue, and the reply to ping is on best effort. Pinging does not pose a
security threat to the network. The controller rate limits any traffic to the CPU, and flooding the
controller is prevented. Clients on the WLAN associated with the interface pass traffic normally.
When pinging does operate successfully, the controller places Internet Control Message Protocol
(ICMP) traffic in a low-priority queue, and the reply to ping is on best effort. Pinging does not pose a
security threat to the network. The controller rate limits any traffic to the CPU, and flooding the
controller is prevented. Clients on the WLAN associated with the interface pass traffic normally.
2006 Image Not Supported for 3504 Controllers
The 2006 controller image is supported for use with only 2000 series controllers. Do not install the 2006
image on a 3504 controller. Otherwise, errors may occur. Install only the 3504 image on a 3504
controller.
image on a 3504 controller. Otherwise, errors may occur. Install only the 3504 image on a 3504
controller.
Running a 3504 Image on a 2000 Series Controller
It is possible to run a 3504 controller image on a 2000 series controller, but Cisco Aironet 1130, 1200,
and 1240 series access points will not be able to connect to the controller.
and 1240 series access points will not be able to connect to the controller.
Upgrading External Web Authentication
When upgrading a controller from operating system release 2.0 or 2.2.127.4 to release 3.2.116.21 or
later, update the external web authentication configuration as follows:
later, update the external web authentication configuration as follows:
1.
Instead of using a preauthentication ACL, the network manager must configure the external web
server IP address using this command:
server IP address using this command:
config custom-web ext-webserver add index IP-address
Note
IP-address is the address of any web server that performs external web authentication.
2.
The network manager must use the new login_template shown here:
<html>
<head>
<meta http-equiv="Pragma" content="no-cache"> <meta HTTP-EQUIV=”Content-Type”
CONTENT="text/html; charset=iso-8859-1"> <title>Web Authentication</title> <script>
function submitAction(){
var link = document.location.href;
var searchString = "redirect=";
var equalIndex = link.indexOf(searchString);
var redirectUrl = "";
var urlStr = "";
if(equalIndex > 0) {
equalIndex += searchString.length;
urlStr = link.substring(equalIndex);
if(urlStr.length > 0){
redirectUrl += urlStr;
if(redirectUrl.length > 255)
redirectUrl = redirectUrl.substring(0,255);
document.forms[0].redirect_url.value = redirectUrl;
}