Технические ссылки для Cisco Cisco Email Security Appliance C160
3-75
CLI Reference Guide for AsyncOS 9.6 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
•
Troubleshoot hardware and network issues using various utilities
•
Check the RAID status
•
Display ARP cache
•
Clear LDAP, DNS, and ARP caches
•
Send SMTP test messages
Using the diagnostic Command
The following commands are available within the
diagnostic
submenu:
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to the login
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the diagnostic command can be used to check RAID status, clear caches and show
the contents of the ARP cache. To invoke as a batch command, use the following formats:
the contents of the ARP cache. To invoke as a batch command, use the following formats:
Use the batch format to perform the following operations:
Table 3-6
diagnostic
Subcommands
Option
Sub Commands
Availability
RAID
1. Run disk verify
Available on C30 and C60 only.
2. Monitor tasks in progress
3. Display disk verify verdict
DISK_USAGE
(deprecated)
No Sub Commands
This command has been deprecated. Instead,
use the
use the
diskquotaconfig
command.
NETWORK
FLUSH
C-, X-, and M-Series
ARPSHOW
SMTPPING
TCPDUMP
REPORTING
DELETEDB
C-, X-, and M-Series
DISABLE
TRACKING
DELETEDB
C-, X-, and M-Series
DEBUG
RELOAD
No Sub Commands
C-, X-, and M-Series