Технические ссылки для Cisco Cisco Email Security Appliance C170

The following commands are available within the 

diagnostic 

submenu:

Commit: This command does not require a ‘commit’. 

Cluster Management: This command is restricted to machine mode. It is further restricted to the login 
host (i.e., the specific machine you are logged onto). This command requires access to the local file 
system.

Batch Command: This command supports a batch format.

The batch format of the diagnostic command can be used to check RAID status, clear caches and show 
the contents of the ARP cache. To invoke as a batch command, use the following formats:

Check the RAID status

diagnostic raid

Clear the LDAP, DNS and ARP caches

diagnostic network flush

Display the ARP cache:

diagnostic network arpshow

RAID

1. Run disk verify

Available on C30 and C60 only.

2. Monitor tasks in 
progress

3. Display disk verify 
verdict

NETWORK

FLUSH

C-, X-, and M-Series 

ARPSHOW

SMTPPING

TCPDUMP