Руководство Пользователя для Cisco Cisco Email Security Appliance X1050
3-25
Cisco AsyncOS 9.0 for Email User Guide
Chapter 3 Setup and Installation
Using the System Setup Wizard
•
•
•
•
•
•
•
•
•
•
•
•
Change the Admin Password
First, you change the password for the AsyncOS admin account. You must enter the old password to
continue. The new password must be six characters or longer. Be sure to keep the password in a secure
location. Changes made to the password are effective once the system setup process is finished.
continue. The new password must be six characters or longer. Be sure to keep the password in a secure
location. Changes made to the password are effective once the system setup process is finished.
Accept the License Agreement
Read and accept the software license agreement that is displayed.
Set the Hostname
Next, you define the fully-qualified hostname for the Email Security appliance. This name should be
assigned by your network administrator.
assigned by your network administrator.
Assign and Configure Logical IP Interface(s)
The next step assigns and configures a logical IP interface on the physical Ethernet interface named
Management (on X1070, C670, and C370 appliances) or Data 1 (on C170 appliances), and then prompts
you to configure a logical IP interface on any other physical Ethernet interfaces available on the
appliance.
Management (on X1070, C670, and C370 appliances) or Data 1 (on C170 appliances), and then prompts
you to configure a logical IP interface on any other physical Ethernet interfaces available on the
appliance.
Each Ethernet interface can have multiple IP interfaces assigned to it. An IP interface is a logical
construct that associates an IP address and hostname with a physical Ethernet interface. If you decided
to use both the Data 1 and Data 2 Ethernet ports, you need the IP addresses and hostnames for both
connections.
construct that associates an IP address and hostname with a physical Ethernet interface. If you decided
to use both the Data 1 and Data 2 Ethernet ports, you need the IP addresses and hostnames for both
connections.
X1070, C670, and C370 customers: Cisco recommends using one of the physical Ethernet ports to
connect directly to the Internet for the purposes of receiving inbound email through public listeners, and
using another physical Ethernet port to connect directly to your internal network for the purposes of
relaying outbound email through private listeners.
connect directly to the Internet for the purposes of receiving inbound email through public listeners, and
using another physical Ethernet port to connect directly to your internal network for the purposes of
relaying outbound email through private listeners.
C170 customers: By default, the
systemsetup
command will configure only one physical Ethernet port
with one listener for receiving inbound email and relaying outbound email.