Руководство Пользователя для Cisco Cisco Email Security Appliance C170

While joining a cluster, you will need to validate the SSH host key of the remote 

machine to which you are joining.  To get the public host key

fingerprint of the remote host, connect to the cluster and run: logconfig -> 

hostkeyconfig -> fingerprint.

WARNING: All non-network settings will be lost. System will inherit the values set at 

the group or cluster mode for the non-network settings.  Ensure that the cluster 

settings are compatible with your network settings (e.g. dnsconfig settings)

Do you want to enable the Cluster Communication Service on 

losangeles.example.com? [N]> n

Enter the IP address of a machine in the cluster.

[]> IP address is entered

Enter the remote port to connect to. The must be the normal admin ssh

port, not the CCS port.

[22]> 22

Enter the admin password for the cluster.

Please verify the SSH host key for IP address:

Public host key fingerprint: xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx

Is this a valid key for this host? [Y]> y

Joining cluster group Main_Group.

Joining a cluster takes effect immediately, there is no need to commit.

Cluster americas

Choose the operation you want to perform: