Руководство Пользователя для Cisco Cisco Email Security Appliance C170

During the initial setup, you can connect to the appliance in one of two ways:

Keep in mind that the initial connection method is not final. This process applies 
only for the initial configuration. You can change network settings at a later time 
to allow different connection methods. (See 

 for more information.) You can also create multiple user accounts 

with differing administrative privileges to access the appliance. (For more 
information, see “Adding Users” in the Cisco IronPort AsyncOS for Email Daily 
Management Guide.)

An Ethernet connection between a PC and the network and 
between the network and the Cisco IronPort Management port. 
The IP address that has been assigned to the Management port by 
the factory is 

192.168.42.42

. This is the easiest way to connect 

if it works with your network configuration.

A serial communications connection between the PC and the 
Cisco IronPort Serial Console port. If you cannot use the 
Ethernet method, a straight serial-to-serial connection between 
the computer and the appliance will work until alternate network 
settings can be applied to the Management port. For pinout 
information, see 

The communications settings for the serial port are:

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: Hardware