Руководство Пользователя для Cisco Cisco Email Security Appliance C690
A-563
Cisco IronPort AsyncOS 7.1 for Email Configuration Guide
OL-22158-02
Appendix A Accessing the Appliance
The following information is required when you configure an IP interface:
Note
If you have completed the GUI’s System Setup Wizard (or the Command Line
Interface
Interface
systemsetup
command) as described in
configured on your appliance. (Refer to the settings you entered in the “Assign
and Configure Logical IP Interface(s)” section.) In addition, the Management
interface is configured on the IronPort appliance.
and Configure Logical IP Interface(s)” section.) In addition, the Management
interface is configured on the IronPort appliance.
Table A-2
IP Interface Components
Name
The nickname of the interface.
IP address
IP addresses within the same subnet cannot be
configured on separate physical Ethernet interfaces.
configured on separate physical Ethernet interfaces.
Netmask (or subnetmask)
You can enter the netmask in standard dotted octet
form (e.g. 255.255.255.0) or hexadecimal form (e.g.
0xffffff00). The default netmask is 255.255.255.0, a
common class C value.
form (e.g. 255.255.255.0) or hexadecimal form (e.g.
0xffffff00). The default netmask is 255.255.255.0, a
common class C value.
Broadcast address
IronPort AsyncOS automatically calculates the
default broadcast address from the IP address and the
netmask.
default broadcast address from the IP address and the
netmask.
Hostname
The hostname that is related to the interface. This
hostname will be used to identify the server during
the SMTP conversation. You are responsible for
entering a valid hostname associated with each IP
address. The software does not check that DNS
correctly resolves the hostname to the matching IP
address, or that reverse DNS resolves to the given
hostname.
hostname will be used to identify the server during
the SMTP conversation. You are responsible for
entering a valid hostname associated with each IP
address. The software does not check that DNS
correctly resolves the hostname to the matching IP
address, or that reverse DNS resolves to the given
hostname.
Allowed services
FTP, SSH, Telnet, IronPort Spam Quarantine, HTTP,
and HTTPS can be enabled or disabled on the
interface. You can configure the port for each
service. You can also specify the HTTP/HTTPS,
port, and URL for the IronPort Spam Quarantine.
and HTTPS can be enabled or disabled on the
interface. You can configure the port for each
service. You can also specify the HTTP/HTTPS,
port, and URL for the IronPort Spam Quarantine.