Листовка для Spaun SMS 9982 NF 842385
Модели
842385
12
www.spaun.com · contact@spaun.de
www.spaun.com · contact@spaun.de
synchronous
-10dB
Level adjuster for each IF
input to adjust different input
levels
input to adjust different input
levels
SAT
Premium-Class
With adjustable SAT output level for or 8 subscribers.
Features:
SAT-IF:
• SAT-IF amplifiers precompensating 4 dB slope
IF selection logic:
1. Using the analogue control signals 14/18 V, 0/22
kHz and ToneBurst or the DiSEqC commands
kHz and ToneBurst or the DiSEqC commands
Polarity, Band and Position
2. Using the mode selector available for each receiver
to swap
• The multiswitches support a standby mode. The
SAT- IF amplifiers and the LNB remote voltage are only
active when at least one receiver feeds a remote
voltage to its multiswitch outlet
to swap
• The multiswitches support a standby mode. The
SAT- IF amplifiers and the LNB remote voltage are only
active when at least one receiver feeds a remote
voltage to its multiswitch outlet
• The multiswitches support DiSEqC 2.0. Bidirectional
communication between receiver and multiswitch is
possible
communication between receiver and multiswitch is
possible
• 9 isolated termination resistors are shipped with the
multiswitches to terminate the trunklines
multiswitches to terminate the trunklines
Cascadable Multiswitch
SMS 9962 NF, SMS 9982 NF
5
... 862 MHz
8x 950 ... 2200 MHz
47
... 862 MHz
active
and
synchronous
A/B
N
22 kHz
N =
Band (Norm)
(Low/High)
EIN/IN 22 kHz EIN/IN
22 =
Position
(East/West)
22 kHz
EIN/IN
A/B =
SAT A
SAT B
LNB supply voltage selectable
12 V (SMATV), 18 V (Twin) or
22 kHz (Universal)
12 V
22 kHz
18 V
Terr.
-15 dB
0 dB
Adjust terrestrial signals
passive
WWWDIGITALFERNSEHENDE
30!5.ä3-3ää.&
4%343)%'%2ä
2EFERENZKLASSE
SMS 9982 NF multiswitch
received the rating „Ref-
erenzklasse“=“Reference
Class“ and is winner of the
comparative test.
received the rating „Ref-
erenzklasse“=“Reference
Class“ and is winner of the
comparative test.
SA
T-IF Distribution
SA
T-IF Distribution