Руководство По Установке для Cisco Cisco TelePresence MX700

Enter required parameters

Enter the parameters required for the chosen provisioning infrastructure (see illustrations below). Then tap 

 to complete the procedure.

WebEx TelePresence 

Upon ordering the Cisco WebEx Telepresence service, you 

have received a 

 and an 

.

Please contact your company's WebEx Telepresence administrator, 

if you do not have a video phone number and an activation code.

Cisco UCM

Contact your UCM provider to get the IP address or DNS name 

of the Cisco UCM

 (

).*

You can find more details about setting up Cisco UCM provi-

sioning in the 

 guide. 

Cisco VCS (for EX Series and MX Series only)

Contact your VCS provider to get the IP address or DNS name 

of the Cisco VCS (

), the SIP 

, and, if 

required, the 

 and 

 for authenticating the 

video system with the provisioning server.

Have a look at the 

 appendix for more information on VCS provisioning.

Start the Provisioning Wizard

Tap the Settings symbol 



in the upper right corner. Tap

 and then 

.

NOTE: 

When you start up a MX or EX system for the first time, 

the Provisioning Wizard starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems: 
•  WebEx Telepresence
•  Cisco UCM (Unified Communications Manager)
•  Cisco VCS (Video Communication Server)

Tap 

 to proceed.

Back to task overview

* The DHCP server can be set up to provide the External Manager 

address automatically (DHCP Option 150). Any input set up here 

overrides the setting provided by DHCP.

Provisioning set-up

(When using a provisioning system)

Cisco TelePresence Video Systems

D14639.10 Video Systems Getting Started Guide TC6.2, July 2013. 

Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 

13

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration