Руководство По Установке для Cisco Cisco TelePresence MX700

Configuration tasks (continued)

Setting the H.323 and SIP parameters

(when not set by a provisioning system)

to get online and ready to place and receive calls, your system

must be set up properly. Your system uses either the H.323

protocol or the SiP protocol for video calls.

Choose one of the following methods to set the H.323 and

SiP parameters:

Web interface

Touch controller

Remote control

and on screen menu

Setting date and time

(when not set by a provisioning system)

When setting up your video conference system, you should

check that the date and time settings are correct. Among other

things this information is used to time stamp messages trans-

mitted to gatekeepers and other network elements.

Choose one of the following methods to set the date and time:

Web interface

Touch controller

Remote control

and on screen menu

Setting the menu password

We strongly recommend that you set a password for the

Administrator Settings menu.

this menu, which is available on both the touch controller and

the remote control, gives access to settings that affect the

behavior of the video conference system.

Choose one of the following methods to set-up the menu

password:

Remote control

and on screen menu

Web interface

Cisco TelePresence Video Systems

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration