Release Note для Cisco Cisco TelePresence MX700

Open and resolved caveats in TC6

Reference ID

Endpoint

Component

Summary

The versions affected are TC6.0.0, TC6.0.1, TC6.1.0,

TC6.1.1, TC6.1.2, TC6.2.0, TC6.2.1 and TC6.3.0

CSCuo26378

All endpoints Platform

Cisco C Series, SX Series, MX Series, Profile Series, EX

Series and any other product including a Cisco C Series

codec includes a version of OpenSSL that is affected by the

vulnerability identified by the Common Vulnerability and

Exposures (CVE) ID CVE-2014-0160.

NOTE: Certificates on codec that may have been

exposed are not removed by upgrading. If using self-

signed certificates, perform backup and factory reset to

generate a new certificate. If not using self-signed

certificates, a new certificate should be generated and

uploaded to the endpoint via the web interface.

Resolved caveats in TC6.3.0

API

Reference ID

Summary

CSCui72188

Codec looses the ability to control the far end camera when changing the following

setting:"xConfiguration Conference 1 Presentation Policy: From "LocalRemote" to

"LocalOnly"

CSCui66926

Customer is unable to Push Configuration Templates to EX60s located behind a

firewall. Firewall is allowing the communication out; this has been verified via packet

captures. Endpoint set to behind firewall in TMS with Status as Active.

Application

Reference ID

Summary

CSCuj13986

TC endpoints except EX60 (without Premium option key) do not display presentation

sent from any CTS endpoint in a CTMS conference.

CSCuh38547

Clearpath not working correctly between TelePresence Server 3.1 and TC endpoint if

TC endpoint is initiating the conference.

CSCui28178

When switching codec from one network to another, the endpoint will pull the correct

DNS information from the DHCP offer, but still use the previously applied DNS

information. In the xStatus you can see the correct DNS information, but all DNS

lookups are done using the previous networks DNS servers which can be seen in the

xConfiguration.

CSCuh65923

Monitor Roles set to wrong default values after factory reset on C60 Profile 52