Руководство По Установке для Cisco Cisco Aironet 1200 Access Point
5
5.
For an access point without the 2.4-GHz radio feature, remove the blank
spacer card.
spacer card.
6.
For an access point with the 2.4-GHz radio feature, remove the existing
2.4-GHz card.
2.4-GHz card.
7.
Install the new 2.4-GHz radio card.
8.
Close the access point 2.4-GHz radio access cover.
Caution
ESD can damage the Cisco Aironet client radio and the internal
components of the access point. It is recommended that the 2.4-
GHz radio upgrade procedures be performed by an ESD trained
service technician at an ESD-protected workstation.
components of the access point. It is recommended that the 2.4-
GHz radio upgrade procedures be performed by an ESD trained
service technician at an ESD-protected workstation.
Unpacking the Radio
Each 2.4-GHz radio is shipped with the following items:
•
This quick start guide
•
A product registration card
•
A T-10 tamper-resistant Torx L-wrench
•
2.4-GHz radio product compliance labels