Техническая Спецификация для Cisco Cisco Aironet 3600i Access Point
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 9
Item
Specification
External Antenna
(Sold Separately)
(Sold Separately)
● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of
● Cisco offers the industry's broadest selection of
delivering optimal coverage for a variety of
deployment scenarios
Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ-45)
● Management console port (RJ-45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
(W x L x H)
(W x L x H)
● Access point (without mounting bracket): 8.7 x 8.7 x 2.11 in. (22.1 x 22.1 x 5.4 cm)
Weight
● 2.5 lbs (1.13 kg)
Environmental
Cisco Aironet 3600i
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test -25˚C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
● Nonoperating (storage) Altitude Test -25˚C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
Cisco Aironet 3600e
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test - 25˚C, 15,000 ft.
● Operating temperature: -4 to 131°F (-20 to 55°C)
● Operating humidity: 10 to 90 percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
● Nonoperating (storage) Altitude Test - 25˚C, 15,000 ft.
● Operating temperature: -4 to 131°F (-20 to 55°C)
● Operating humidity: 10 to 90 percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
System Memory
● 256-MB DRAM
● 32-MB flash
● 32-MB flash
Input Power
Requirements
Requirements
● AP3600: 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
*
This is the power required at the PSE, which is a switch or injector.
Description
AP Functionality
PoE Budget
*
(Watts)
802.3af
E-PoE
802.3at
PoE+
PoE+
PWRINJ4
PoE+
802.3at
3600 - No external module installed
4x4:3 on 2.4/5 GHz
15.4
3600 - 2.4GHz radio disabled +
Wireless Security Module
Wireless Security Module
4x4:3 on 5 GHz + WSM
15.4
n/a
n/a
3600 - 2.4GHz radio disabled +
802.11ac Module
802.11ac Module
4x4:3 on 5 GHz only + 11ac
15.4
n/a
n/a
PoE
802.3af
3600 + Wireless Security Module
4x4:3 on 2.4/5 GHz + WSM
18.4
×
3600 + 802.11ac Module
4x4:3 on 2.4/5 GHz + 11ac
19.6
×
3600 + Universal Small Cell Module
(USC5310)
(USC5310)
4x4:3 on 2.4/5 GHz +
USC5310
USC5310
22
×
×
Warranty
Limited Lifetime Hardware Warranty
Compliance
Standards
Standards
◦
UL 60950-1
◦
CAN/CSA-C22.2 No. 60950-1
◦
UL 2043
◦
IEC 60950-1
◦
EN 60950-1
◦
EN 50155
● Radio approvals:
◦
FCC Part 15.247, 15.407
◦
RSS-210 (Canada)
◦
EN 300.328, EN 301.893 (Europe)
◦
ARIB-STD 66 (Japan)
◦
ARIB-STD T71 (Japan)
◦
EMI and susceptibility (Class B)