Руководство По Обслуживанию для Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch

Voice and Media

Cisco Small Business SF200E Series Advanced Smart Switch

125

 

For Application Status, select Enable to enable priority assignment for the 
selected application. Uncheck the box to disable this feature. 

If you enabled Application Status, enable or disable the following features:

•

Untagged—Select Enable if the media device (LLDP-MED Endpoint) will 
send untagged packets. The network policy TLV from the switch must also 
indicate this expectation, and a media device must acknowledge that it will 
use untagged frames. Uncheck the box to disable this feature.

•

VLAN and VLAN ID—Select Enable to specify a VLAN, and then choose a 
VLAN ID from the list. Uncheck the box to disable this feature.

•

Priority and Priority Value—Select Enable to prioritize packets of the 
selected application. Then enter an IEEE 802.1p class-of-service priority 
tagging value for Media VLAN traffic. The priority tag range is 0–7. 

•

DSCP and DSCP Value—Select Enable to specify a DSCP for the selected 
application. Then enter a DSCP value for the port. The range is 0-63. 

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

Ensure that LLDP-MED is enabled on the interface. You can click Enable LLDP-MED 
Network Policy to display the LLDP-MED Port Settings page. See 

 for 

more information.

The Auto VoIP Sessions page displays information about the source, destination, 
and protocol for each Voice over IP session.