Руководство По Обслуживанию для Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
Administration
LLDP-MED
Cisco Small Business SF200E Series Advanced Smart Switch
91
3
Configuring Global LLDP-MED Properties
Use the LLDP MED Properties page to specify global parameters for this feature.
To configure global LLDP-MED properties:
STEP 1
Click Administration > Discovery - LLDP-MED > Properties in the navigation
window.
window.
The LLDP-MED specification defines two primary device classes: Network
Connectivity devices and Endpoint devices. As indicated in the Device Class field,
the switch is classified as a Network Connectivity device.
Connectivity devices and Endpoint devices. As indicated in the Device Class field,
the switch is classified as a Network Connectivity device.
STEP 2
For Asset ID, enter the asset ID for the switch, advertised in Inventory TLVs.
STEP 3
Specify the Location Parameters to identify the physical location of the switch:
•
Subtype—Select one of the following options to configure how the switch
location is identified in TLVs:
location is identified in TLVs:
-
Coordinate Based—Switch location is identified using GPS coordinates
in hexadecimal format.
in hexadecimal format.
-
Civic Address—Switch location is identified using a geographic
description of the location, such as city, street name, and building name.
description of the location, such as city, street name, and building name.
-
ELIN—Switch location is identified using the Emergency Location
Identification Number (ELIN) of the switch.
Identification Number (ELIN) of the switch.
•
Coordinates—Switch GPS coordinates in hexadecimal format.
•
ELIN Address—The ELIN number.
•
Country—Country where the city is located. This is a two-character code as
defined by ISO 3166.
defined by ISO 3166.
•
City—City where the street is located.
•
Street—Street where the building is located.
•
Building—Building in which the switch is located.
NOTE:
The City, Street, and Building fields share the maximum character
limitation; i.e., an entry in one field reduces the maximum allowable characters
in the others. The maximum combine length of the city, street, and building fields
is 246 characters. The characters ', ", %, and ? are not supported.
in the others. The maximum combine length of the city, street, and building fields
is 246 characters. The characters ', ", %, and ? are not supported.