Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Show Commands (A-C)
▀ show alarm
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
show alarm
Displays alarm information.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays the state of all alarms in one screen.
Displays the state of the internal audible alarm buzzer on the SMC.
Displays the state of the CO Alarm relays on the SPIO.
Displays the state of the facility (audible and CO) alarms.
Displays information on currently outstanding alarms.
: Displays all alarm information.
: Displays chassis/power/fan alarms.
: Shows the alarm information for the specified port.
: Shows the alarm information for the card in the specified slot.
: Displays more verbose output, including the internal alarm ID
Displays basic statistics on the alarming subsystem, including the current number of outstanding alarms of
different severities and a cumulative total of alarms generated.
different severities and a cumulative total of alarms generated.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.