Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands
ps-network ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ps-network
This command creates/removes an HNB-PS network configuration instance for Femto UMTS access over Iu-PS/Iu-Flex
interface between Home NodeB Gateway (HNB-GW) service and PS networks elements; i.e. SGSN. This command
also configures an existing HNB-CS network instance and enters the HNB-CS Network Configuration mode on a
system.
interface between Home NodeB Gateway (HNB-GW) service and PS networks elements; i.e. SGSN. This command
also configures an existing HNB-CS network instance and enters the HNB-CS Network Configuration mode on a
system.
Product
HNB-GW
Privilege
Administrator
Syntax
Removes the specified HNB-PS network instance from the system.
Caution:
Removing the HNB-PS network instance is a disruptive operation and it will affect all UEs accessing
SGSN(s) in specific PS core network through the HNB-GW service.
W
ARNING
:
If any HNB-PS Network instance is removed from system all parameters configured in that mode will
be deleted and Iu-PS/Iu-Flex interface will be disabled.
Specifies the name of the Packet Switched Core Networks instance which needs to be associated with HNB
Radio Network PLMN in HNB RN-PLMN configuration mode. If
Radio Network PLMN in HNB RN-PLMN configuration mode. If
does not refer to an
existing HNB-PS instance, the new HNB-PS network instance is created.
must be from 1 to 63 alpha and/or numeric characters.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to enter the HNB-PS Network Configuration mode for an existing PS network instance or
for a newly defined HNB-PS network instance. This command is also used to remove an existing HNB-PS
network instance.
This configuration enables the Iu-PS/Iu-Flex interface on HNB-GW service with CS core network elements;
i.e. MSC/VLR.
A maximum of 8 HNB-PS networks instance can be configured on a system which is further limited to a
maximum of 256 services (regardless of type) can be configured per system.
for a newly defined HNB-PS network instance. This command is also used to remove an existing HNB-PS
network instance.
This configuration enables the Iu-PS/Iu-Flex interface on HNB-GW service with CS core network elements;
i.e. MSC/VLR.
A maximum of 8 HNB-PS networks instance can be configured on a system which is further limited to a
maximum of 256 services (regardless of type) can be configured per system.
Caution:
This is a critical configuration. The HNBs can not access SGSNs in PS core network without this
configuration. Any change to this configuration would lead to disruption in HNB access to PS core network.