Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands
▀ threshold aaa-auth-failure-rate
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold aaa-auth-failure-rate
Configures authentication failure rate thresholds for the system.
Product
PDSN, GGSN, HA, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Default: 5
The high threshold percent of authentication failures that must be met or exceeded within the polling interval
to generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
The high threshold percent of authentication failures that must be met or exceeded within the polling interval
to generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
Allows the configuration of the low threshold.
Default: 5
The low threshold percent of authentication failures that maintains a previously generated alarm condition. If
the percentage of failures falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
The low threshold percent of authentication failures that maintains a previously generated alarm condition. If
the percentage of failures falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Authentication failure rate thresholds generate alerts or alarms based on the percentage of AAA
authentication message requests that failed during the specified polling interval. Authentication requests are
counted for all AAA authentication servers that the system is configured to communicate with.
Alerts or alarms are triggered for authentication failures based on the following rules:
authentication message requests that failed during the specified polling interval. Authentication requests are
counted for all AAA authentication servers that the system is configured to communicate with.
Alerts or alarms are triggered for authentication failures based on the following rules:
Enter condition: Actual failure percentage ³ High Threshold
Clear condition: Actual failure percentage < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.