Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Active Charging Service Configuration Mode Commands
edr-udr-flow-control ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
edr-udr-flow-control
This command enables Flow Control between Session Managers and the CDRMOD process.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables Flow Control.
Configures the default setting.
Default: Flow Control is enabled;
Default: Flow Control is enabled;
is set to 375
Specifies the Flow Control unsent queue size at sessmgr level.
must be an integer from 1 through 2500.
Usage
Use this command to enable Flow Control between Session Managers and the CDRMOD process, and
configure the unsent queue size.
configure the unsent queue size.
Example
The following command enable Flow Control between Session Managers and the CDRMOD process, and configure the
unsent queue size to
The following command enable Flow Control between Session Managers and the CDRMOD process, and configure the
unsent queue size to
: