Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
ISAKMP Configuration Mode Commands
▀ authentication
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
authentication
Configures the ISAKMP policy authentication mode.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Restores the default setting of this parameter. The command is enabled by default.
Disables the preshared key authentication mode.
Specifies that the policy will be authenticated through the use of the pre-shared key.
Usage
When the system is configured to use ISAKMP-type crypto maps for establishing IPSec tunnels, this
command is used to indicate that the policy will be authenticated through the use of the pre-shared key
configured in the ISAKMP crypto map.
command is used to indicate that the policy will be authenticated through the use of the pre-shared key
configured in the ISAKMP crypto map.
Example
The following command sets policy authentication mode to use a pre-shared key:
The following command sets policy authentication mode to use a pre-shared key: