Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Active Charging Service Configuration Mode Commands
nat allocation-in-progress ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
nat allocation-in-progress
Configures action to take on packets when NAT IP/NPU allocation is in progress.
Important:
This command is only available in StarOS 8.3 and later releases.
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Sets the default configuration.
Specifies the action to take on packets when NAT IP/NPU allocation is in progress:
: Specifies to buffer packets
: Specifies to drop packets
Default: buffer
Usage
In On-demand NAT IP allocation (wherein NAT IP address is allocated to the subscriber when a packet is
being sent), if no free NAT IP address is available, a NAT-IP Alloc Request is sent to the VPNMgr to get
NAT-IP. During that time packets are dropped. This command enables buffering the packets received when
IP Alloc Request is sent to VPNMgr.
being sent), if no free NAT IP address is available, a NAT-IP Alloc Request is sent to the VPNMgr to get
NAT-IP. During that time packets are dropped. This command enables buffering the packets received when
IP Alloc Request is sent to VPNMgr.
Example
The following command specifies to buffer packets when NAT IP/NPU allocation is in progress:
The following command specifies to buffer packets when NAT IP/NPU allocation is in progress: