Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
PDSN Service Configuration Mode Commands
▀ spi
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
spi
Configures the security parameter index (SPI) between the PDSN service and the PCF. This command also configures
the redirection of call based on PCF zone.
the redirection of call based on PCF zone.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
: Specifies the IP address of the PCF. pcf_ip_address is an IP address expressed in IP v4
dotted decimal notation.
: Specifies the IP address of the PCF and specifies the IP address network mask
bits.
must be specified using the form ‗IP Address/Mask Bits‘ where the IP
address must either be an IPv4 address expressed in dotted decimal notation or an IPv6 address expressed in
colon notation and the mask bits are a numeric value which is the number of bits in the subnet mask.
colon notation and the mask bits are a numeric value which is the number of bits in the subnet mask.
Specifies the SPI (number) which indicates a security context between the PCF and the PDSN in accordance
with IOS 4.1 and RFC 2002.
number can be configured to any integer value between 256 and 4294967295.
with IOS 4.1 and RFC 2002.
number can be configured to any integer value between 256 and 4294967295.
Configures the shared-secret between the PDSN service and the PCF. The secret can be either encrypted or
non-encrypted.
non-encrypted.
: Specifies the encrypted shared key (enc_secret) between the PCF
and the PDSN service. enc_secret must be between 1 and 254 alpha and/or numeric characters and is case
sensitive.
sensitive.
: Specifies the shared key (secret) between the PCF and the PDSN services. secret must be
between 1 and 127 alpha and/or numeric characters and is case sensitive.
The
The
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
keyword in the configuration file as a flag that the variable following the
keyword is the encrypted version of the plain text secret key. Only the encrypted secret key is saved
as part of the configuration file.
This is a description for the SPI.
must be an alpha and or numeric string of from 1 through 31
characters.