Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Peer-Server Configuration Mode Commands
▀ self-point-code
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
self-point-code
This command defines the point-code to identify the SGSN as a peer server.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Point-code is an SS7-type address for an element in the SS7 network. Point-codes must be defined in dotted-
decimal format in a string of 1 to 11 digits. Options include:
decimal format in a string of 1 to 11 digits. Options include:
0.0.1 to 7.255.7 for point-code in the ITU range.
0.0.1 to 255.255.255 for point-code in the ANSI range.
0.0.1 to 15.31.255 for point-code in the TTC Range.
a string of 1 to 11 digits in dotted-decimal to represent a point-code in a different range.
Removes the self-point-code configuration for this linkset in the peer server.
Important:
Removing the self-point-code will result in the termination of all traffic on this link.
Usage
Use this command to define the point-code to identify the SGSN.
Example