Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Radio Network Controller (RNC) Configuration Mode Commands
▀ direct-tunnel
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
direct-tunnel
This command enables/disables the direct tunnel feature through the interface to the radio network controller (RNC).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Sets the direct tunnel support on RNC to default mode; i.e. enabling direct tunnel.
Default: enabled
Disables the direct-tunnel support on radio network controller (RNC).
Disables the direct-tunnel support on radio network controller (RNC).
Usage
Use this command to disable/enable the direct-tunnel function on RNC.
Example
Following command disables the direct tunnel support on RNC:
Following command disables the direct tunnel support on RNC: