Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Radio Network Controller (RNC) Configuration Mode Commands
▀ overload-action disable
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
overload-action disable
This command maps an action to be taken if traffic reaches or exceeds defined levels.
The command can be re-entered multiple times to create definitions for each parameter.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the defined overload action from configuration.
Resets the traffic level to the default level for the associated overload action.
The system rejects new requests to activate PDP contexts if the defined traffic-level is exceeded.
: An integer 1 to 15.
Default: 14
The system rejects new requests for GPRS attach if the defined traffic-level is exceeded.
: An integer 1 to 15.
Default: 15
The system skips performing authentication challenges if the defined traffic-level is exceeded.
: An integer 1 to 15.
Default: 4
The system rejects requests to modify a PDP context if the defined traffic-level is exceeded.
: An integer 1 to 15.
Default: 12