Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ ipv6 access-group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ipv6 access-group
This command configures IPv6 access group for the current APN profile which applies a Single ACL to Multiple
Subscribers via APN for ipv6 traffic.
Subscribers via APN for ipv6 traffic.
Product
GGSN, ECS, P-GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured IPv6 ACL applied to a particular APN for IPv6 traffic. As per your
requirement at least one of the two
requirement at least one of the two
must be selected for which the ACL will be removed.
Specifies the name of the IPv6 access group.
must be an alpha and/or numeric string of 1 to
79 characters.
Default: both (in and out)
Specifies the access-group as either inbound or outbound by the keywords
Specifies the access-group as either inbound or outbound by the keywords
and
, respectively.
If neither of any specified with the base command the specific IPv6 access control list will be applied to both
the traffic (downlink and uplink).
the traffic (downlink and uplink).
Usage
Use this command to apply a single IPv6 access control list to multiple subscribers via an APN for inbound
or outbound IPv6 traffic.
If no traffic direction specified the selected access control list will be applied to both direction of traffic.
or outbound IPv6 traffic.
If no traffic direction specified the selected access control list will be applied to both direction of traffic.
Example
The following command associates the
The following command associates the
access group with the current APN profile for both
inbound and outbound access:
The following removes the outbound access group flag for
: