Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
SGSN PSP Configuration Mode Commands
▀ end-point
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
end-point
This command defines or deletes the IP address to be associated with the local SCTP end-point for the application
server process (ASP).
server process (ASP).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Identifies the M3UA‘s SCTP port associated with this end-point.
: must be an integer from 1 to 65535.
Removes the end-point configuration.
Removes the ASP end-point association from the PSP configuration.
Important:
This command can not be used as long as the PSP and the ASP are associated.
Usage
Use this command to manage the ASP end-point. At least one address needs to be configured for the ASP
before the end-point can be associated with the PSP.
before the end-point can be associated with the PSP.
Example
Set the end-point to IP address 192.168.1.1 with the following command:
Set the end-point to IP address 192.168.1.1 with the following command: