Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
ipv6 initial-router-advt ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ipv6 initial-router-advt
Creates an IPv6 initial router advertisement interval for the subscriber.
Product
PDSN, GGSN, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Resets interval or num-advts to their default setting.
Default: 3000ms
The time interval the initial IPv6 router advertisement is sent to the mobile node in milliseconds.
value is an integer between 100 and 16000 milliseconds.
The time interval the initial IPv6 router advertisement is sent to the mobile node in milliseconds.
value is an integer between 100 and 16000 milliseconds.
Default: 3
The number of initial IPv6 router advertisements sent to the mobile node.
value is an integer between 1 to 16.
The number of initial IPv6 router advertisements sent to the mobile node.
value is an integer between 1 to 16.
Usage
This command is used to set the advertisement interval and the number of advertisements. Using a smaller
advertisement interval increases the likelihood of router being discovered more quickly when it first becomes
available.
advertisement interval increases the likelihood of router being discovered more quickly when it first becomes
available.
Example
The following command specifies the initial ipv6 router interval to be 2000ms:
The following command specifies the initial ipv6 router interval to be 2000ms: