Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
selection-mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
selection-mode
Configures the level of verification that will be used to ensure a MS‘s subscription to use this APN.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Default: Disabled
The MS‘s subscription will not be verified and the APN will be provided by the SGSN.
The MS‘s subscription will not be verified and the APN will be provided by the SGSN.
Default: Disabled
The MS‘s subscription will not be verified and the APN will be provided by the MS.
The MS‘s subscription will not be verified and the APN will be provided by the MS.
Default: Enabled
The MS‘s subscription will be verified by the SGSN.
The MS‘s subscription will be verified by the SGSN.
More than one of the above keywords can be entered within a single command.
Usage
Use this command to specify the level of verification that will be used to ensure a MS‘s subscription to use
this APN. This setting must mach the corresponding setting on the SGSN. If the two settings are not identical,
the GGSN rejects the session with a cause code of 201 (D1H, User authentication failed).
this APN. This setting must mach the corresponding setting on the SGSN. If the two settings are not identical,
the GGSN rejects the session with a cause code of 201 (D1H, User authentication failed).
Example
The following command specifies that the MS‘s subscription will not be verified and that the APN name will be
supplied by the SGSN:
The following command specifies that the MS‘s subscription will not be verified and that the APN name will be
supplied by the SGSN: